w w w . d e l l . c o m / s u p p l i e s s u p p o r t . d e l l . c o m
12Use the default printer name (for example, Dell Laser Printer M5200) or type a unique name for your printer, and then click Next.
13Select Yes to print a test page, and then click Finish. All the necessary files are installed on your computer.
14After the test page prints, click Yes to close the message window.
15Click Finish to complete the installation.
16Launch the Drivers and Utilities CD: click Start → Run and browse your CD drive (for example, type D:\ where D is the drive letter of your CD).
17Select SETUP.EXE, and then click OK.
18When the Dell Drivers and Utilities CD screen appears, click Install the printer for Use on this Computer only (Personal Installation) to install the additional software for your printer.
If you are prompted to restart your computer, click Yes. Otherwise, the Congratulations screen appears.
19Click Exit on the Drivers and Utilities CD screen.
Using Windows 95
NOTE: USB support is not available for Windows 95 operating systems.
When you attached the parallel cable and turned on the printer and computer, the Update Device Driver wizard appeared on your computer screen.
1Insert the Drivers and Utilities CD, and then click Next.
If a
If no compatible system driver is found on your operating system, click Other Locations.
2Browse to the location of the printer driver on the Drivers and Utilities CD, and then click OK.
42
Set up for local printing