Atlas Sound MG2500 operation manual Gain Matrix #1 Screen

Page 6

SETUP

GAIN MATRIX #1 SCREEN

The Gain Matrix #1 screen provides a channel-to-channel (2x2) mix matrix, which can be used to adjust the amount of Input & Noise signal being routed to each of the processing channels (Output 1 & Output 2). From the factory, Input 1 is routed to Output 1 only, and Noise is routed to Output 2 only, providing two independent signal paths. Levels are adjusted by dragging the corresponding ‘faders’ up or down. ‘Meters’ are provided on each channel to display input/output levels at Gain Matrix #1. NOTE: For best performance, adjust levels so the meters show occasional peaks in the yellow area, but never to the top (red). Invert allows the phase of each corresponding signal path to be reversed (180°).

The MG2500 has two basic applications which utilize Gain Matrix #1:

1)Input 1 can be routed to Output 1 and Noise can be routed to Output 2. Each channel of processing is dedicated to either Input 1 or Noise signal. Switching between Input 1 & Noise signals (to either Output) is then accomplished via Gain Matrix #2 presets (see Gain Matrix #2 screen on pg. 8). This is effective when only a single output (zone), or two outputs (zones) with independent delay, are required.

2)Gain Matrix #1 presets can be used to switch between Input 1 or Noise signal being routed to either Output. Each channel of processing is dedicated to a specific Output (zone), via Gain Matrix #2. Separate EQ presets for Input 1 & Noise signals, as they appear at each output (zone), can also be used. This is effective when two outputs (zones), each with dedicated processing, are required.

Of course, the MG2500 can simply be configured for processing Noise (or Input 1) signal only, at both Outputs.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Atlas Sound MG2500 May Table of Contents IntroductionFront & Rear Panel Features SoundMaskingMG2500ProcessorSetup Main ScreenGain Matrix #1 Screen Gain Manager Screen Parametric EQ Screen Graphic EQ Screen Gain Matrix #2 Screen Digital Delay Screen Logic Input Definitions Screen Configuration Options Screen Multiple switches to single Logic Input Logic InputsLogic inputs Pin numbers RS-232 Control Specifications & Block Diagram MG2500 Block DiagramWarranty Limited WarrantyReturns What is this ’Leveler’ inside the MG2500? Page Page

MG2500 specifications

The Atlas Sound MG2500 is a robust and versatile professional audio mixer designed to meet the demands of various applications, including live sound, broadcasting, and recording environments. This mixer stands out for its exceptional build quality, intuitive layout, and advanced features, making it a favorite among audio professionals.

One of the main features of the MG2500 is its configuration, which typically includes 16 channels, allowing for extensive input options. Each channel is equipped with high-quality preamps that ensure clean and clear signal transfer. The mixer offers both XLR and quarter-inch inputs, accommodating a variety of microphones and instruments. Additionally, the MG2500 provides phantom power, enabling the use of condenser microphones that require an external power source.

The MG2500 incorporates a 3-band equalization on each channel, consisting of low, mid, and high-frequency controls. This feature allows users to enhance or reduce specific frequency ranges, tailoring the sound to fit the environment and accommodating various audio sources. The inclusion of multiple auxiliary sends enables stage monitoring and effects processing, enhancing flexibility in live settings.

One of the standout technologies in the MG2500 is its onboard digital effects processor. This feature offers a wide range of customizable effects, such as reverb and echo, which can be applied to any channel, enriching the overall sound experience. The user-friendly interface makes accessing these effects straightforward, allowing for quick adjustments during performances.

The mixer also caters to modern audio needs with USB connectivity, facilitating easy integration into digital audio workstations (DAWs). This function makes recording and playback seamless, appealing to both live sound engineers and studio producers. Furthermore, the MG2500 is designed to withstand the rigors of live performances, featuring a durable chassis that ensures longevity and reliability under demanding conditions.

In terms of output options, the MG2500 includes multiple main and monitor outputs, allowing for flexible routing and connection to various sound systems. Additionally, the built-in audio limiter helps prevent signal clipping, ensuring clear and undistorted sound at high volume levels.

With its powerful features and robust construction, the Atlas Sound MG2500 is an excellent choice for professionals seeking a reliable and flexible audio mixer capable of delivering superior sound quality across various applications.
Top Page Image Contents