Dell 2850 1x2 Drive Fail n Hard drive or RAID controller, Controller Card, EB107, PCI-e card

Table 1-4. LCD Status Messages (continued)

Line 1	Line 2	Causes	Corrective Actions
Message	Message
E0D76	BP DRIVE n	Faulty or improperly installed	See "Troubleshooting SCSI Hard
	1x2 DRIVE FAIL n	hard drive or RAID controller.	Drives" "Troubleshooting a RAID
	SCSI CONNECTOR		Controller Card, " and
			"Troubleshooting the Integrated
			RAID Controller" in your
			Installation and Troubleshooting
			Guide.
EB107	PROC BUS ERR	Faulty or improperly installed	See "Troubleshooting the
	PROC INIT ERR	microprocessor or system board.	Microprocessors" in your
	PROC PROTOCOL		Installation and Troubleshooting
	ERR		Guide. If the problem persists, see
			"Getting Help" in your
			Installation and Troubleshooting
			Guide.
EB107	PCIE FATAL ERR	Faulty or improperly installed	Remove and reseat the PCI-e
	CHIPSET ERR	PCI-e card.	expansion cards. If the problem
		Faulty or improperly installed	persists, see "Troubleshooting
		riser card.	Expansion Cards" in your
		Faulty system board.	Installation and Troubleshooting
			Guide.
			Reinstall the expansion-card cage.
			See "Installing the Expansion-
			Card Cage" in your Installation
			and Troubleshooting Guide.
			If the problem persists, the riser
			card or system board is faulty.
			See "Getting Help" in your
			Installation and Troubleshooting
			Guide.
EB107	MEMORY MIRRORED	Memory mirroring enabled.	Information only.
EB107	MEMORY SPARED	Memory spare bank enabled.	Information only.
EFFF2	ROMB PRESENCE	Integrated RAID controller is	Information only.
		activated.
IB110	SBE LOG DISABLED		Information only.
	LOGGING DISABLED
IS000	INTRUSION	System cover has been removed.	Information only

NOTE: For the full name of an abbreviation or acronym used in this table, see the "Glossary" in your User’s Guide.

Information Update

9