e)hard drive
f)keyboard
g)palmrest
h)WLAN card
3.Remove the screw that secures the
Installing the mini-SATA Card
1.Place the card into the
2.Tighten the screw to secure the
3.Install the:
a)WLAN card
b)palmrest
c)keyboard
d)hard drive
e)optical drive
f)memory
g)base cover
h)battery
4.Follow the procedures in After Working Inside Your Computer
Removing the USB Daughter Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)battery
b)base cover
c)memory
d)optical drive
e)hard drive
f)keyboard
g)palmrest
h)WLAN card
i)system board
j)
k)
l)heat sink
m)processor
3.Flip the system board with the processor slot facing down.
39