Dell 8500 manual Fan

Page 18

Back to Contents Page

Fan

Dell™ Inspiron™ 8500/8600 Service Manual

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

1.Follow the instructions in "Preparing to Work Inside the Computer."

2.Remove the two M2.5 x 12 screws from the fan cover.

1M2.5 x 12-mm screws (2)

2fan cover

3.Lift the fan out of the computer.

Back to Contents Page

Image 18

Contents Model PP02X August 2003 Rev. A02 Before You Begin Preparing to Work Inside the ComputerRecommended Tools Computer OrientationScrew Identification Page Each System Board Back to Contents Flashing the Bios Bluetooth Card Color Insert Cover Removing the Color Insert CoverReplacing the Color Insert Cover Microprocessor Module Removing the Microprocessor ModuleInstalling the Microprocessor Module Display Assembly Display AssemblyDisplay Display Bezel Display PanelBack to Contents Installing the Docking Doors Docking DoorsRemoving the Docking Doors Docking doors with spring Longer post Fan Hard Drive Keyboard Back to Contents Base Latch Palm Rest Back to Contents Pin Assignments for I/O Connectors USB ConnectorVideo Connector Parallel Connector Video TV-Out ConnectorSerial Connector DCD DSR Rxda RTS Txda CTS DTR GND Reserve Battery Page Speakers System Board Removing the System BoardPage Installing the System Board System Components Microprocessor Thermal-Cooling Assembly Removing the Microprocessor Thermal-Cooling AssemblyInstalling the Microprocessor Thermal-Cooling Assembly Back to Contents Memory Module, Mini PCI Card, Modem, and Modules Memory ModuleMini PCI Card Page Modem If the Device Screw Is Not Installed ModulesIf the Device Screw Is Installed Back to Contents Video Card

Related manuals

Manual 186 pages 31.55 Kb