Dell E5450 owner manual Installing the Hard-Drive Assembly

Page 12

6.Remove the screws that secure the hard-drive bracket to the hard drive [1] and remove the hard drive from the hard-drive bracket [2].

Installing the Hard-Drive Assembly

1.Place the hard-drive bracket on the hard drive to align the screw holders and tighten the screws to secure the hard-drive bracket.

2.Connect the hard-drive cable to its connector on the hard drive.

3.Place the hard-drive assembly into its slot on the computer.

4.Connect the hard-drive cable to its connector on the system board.

5.Tighten the screws to secure the hard-drive assembly to the computer.

6.Install the:

12

Image 12

Contents Dell Latitude E5450 Page Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your Computer Recommended Tools System OverviewFront and Back View Installing the SD Card Removing the SD CardRemoving the Base Cover Installing the Base Cover Removing the BatteryInstalling the Battery Removing the Hard-Drive AssemblyPage Installing the Hard-Drive Assembly Installing the Memory Removing the MemoryRemoving the Keyboard Trim Installing the Keyboard Trim Removing the KeyboardInstalling the Keyboard Removing the PalmrestBase cover Battery Keyboard trim Installing the Palmrest Removing the SmartCard Reader BoardPage Installing the SmartCard-Reader Board Removing the USH BoardInstalling the USH Board Removing the Finger-Print Reader BoardInstalling the Finger-Print Reader Board Removing the LED BoardInstalling the LED Board Removing the Power-Connector PortInstalling the power-connector port Installing the Wlan Card / WiGig Card Removing the Wlan Card / WiGig CardInstalling the Wwan Card Removing the Wwan CardRemoving the Display-Hinge Brackets Installing the Display-Hinge Brackets Removing the Display AssemblyPage Installing the Display Assembly Removing the Display BezelInstalling the Display Bezel Removing the Display PanelPage Installing the Display Panel Removing the Display HingesInstalling the Display Hinges Removing the CameraInstalling the Camera Removing the eDP CableInstalling the eDP cable Removing the Coin-Cell BatteryInstalling the Coin-cell Battery Removing the System BoardDisplay assembly Installing the System Board Removing the Heatsink AssemblyInstalling the Heatsink Assembly Removing the Speakers Installing the Speakers System Setup Options PS2 Video Page KEK Performance Page Post Behavior Wwan Maintenance Technical Specifications UMA USB Feature Specification Active Area Axis 99.50 mm 53.00 mm Battery Environmental Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsDevice Status Lights Battery Status Lights Contacting Dell