System Setup Overview
You can use the system setup program as follows:
•To set or change
•To verify information about your computer's current configuration, such as the amount of system memory
After you set up your computer, run the system setup program to familiarize yourself with your system configuration information and optional settings. Dell recommends that you write down the information for future reference.
The system setup program contains the standard settings for your computer.
NOTICE: Unless you are an expert computer user or are directed to do so by Dell technical support, do not change the settings for this program. Certain changes might make your computer work incorrectly.
Viewing the System Setup Screens
1Turn on (or restart) your computer.
2When the Dell™ logo appears, press immediately.
If you wait too long and the Windows® logo appears, continue to wait until you see the Windows desktop. Then shut down your computer (see page 42) and try again.
Depending on your computer, you may also be able to enter the system
setup program by pressing at any time while the computer is running.
System Setup Screens
The system setup screens display the current setup information and settings for your computer. Each screen is laid out with the system setup options listed at the left. To the right of each option is a field that displays the setting or value for that option. You can change settings that appear as white type on the screen. Options or values that you cannot change (because they are determined by the computer) appear less bright.
HINT: Your operating system may automatically configure most of the options available in the system setup program, thus overriding options that you set through the system setup program. (An exception is the External Hot Key option, which you can disable or enable only through the system setup program.) For more information on configuring features for your operating system, see your Microsoft® Windows Help and Support Center.
HINT: To see information about a specific item on a system setup screen, highlight the item and refer to the Help area on the screen.