11
USB Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery, see "Removing the Battery" on page 13, before working inside the computer.
Removing the USB Board
1Follow the procedures in "Before You Begin" on page 9.
2Remove the battery. See "Removing the Battery" on page 13.
3Follow the instructions from step 3 to step 8 in "Removing the
4Remove the hard drive. See "Removing the Hard Drive" on page 37.
5Lift the connector latch that secures the
6Release the tabs that secure the USB board to the computer base and lift the USB board off the computer base.
USB Board
43