1
2
3
1 | tape | 2 |
3 | display cable |
|
Replacing the Display Panel
1Follow the instructions in "Before You Begin" on page 9.
2Attach the display cable to the back of the display panel.
3Connect the display cable to the
4Align the screw holes on the display bracket with the screw holes on the display panel and replace the four screws (two on each side).
5Route the display cable and
6Align the screw holes on the display panel with the screw holes on the display cover and replace the six screws.
7Replace the display bezel. See "Replacing the Display Bezel" on page 60.
8Replace the display assembly. See "Replacing the Display Assembly" on page 58.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
Display
63