1 2
3
1 | 2 USB board | |
3 | tabs (2) |
|
Replacing the USB Board
1Follow the procedures in "Before You Begin" on page 9.
2Slide the connectors on the USB board into the slots on the computer base and snap the USB board into place.
3Slide the
4Replace the hard drive. See "Replacing the Hard Drive" on page 39.
5Follow the instructions from step 3 to step 7 in "Replacing the
6Replace the battery. See "Replacing the Battery" on page 14.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
44
USB Board