Dell 1340 manual Graphic Processor Heat Sink/Thermal Fan

Page 13

3.Tighten the four captive screws that secure the central processor heat sink to the system board.

4.Replace the rear caps (see Replacing the Rear Caps).

5.Replace the base cover (see Replacing the Base Cover).

6.Slide the battery into the battery bay until it clicks into place.

Graphic Processor Heat Sink/Thermal Fan

Removing the Graphic Processor Heat Sink/Thermal Fan

NOTE: The graphic processor heat sink availability may depend on your system configuration.

NOTE: The removal procedure for the thermal fan may differ according to your system configuration.

1.Follow the instructions in Before You Begin.

2.Remove the base cover (see Removing the Base Cover).

3.Remove the rear caps (see Removing the Rear Caps).

4.Remove the central processor heat sink (see Removing the Central Processor Heat Sink).

5.Loosen the two captive screws and remove the other two screws that secure the graphic processor heat sink/thermal fan to the system board.

6.Disconnect the thermal fan cable from the system board connector.

1

fan cable

2

graphic processor heat sink

3

thermal fan

4

screws (2)

5captive screws (2)

7.Lift the graphic processor heat sink/thermal fan off the computer.

Replacing the Graphic Processor Heat Sink/Thermal Fan

NOTE: This procedure assumes that you have already removed the graphic processor heat sink/thermal fan and are ready to replace it.

1. Place the new thermal cooling pad on the graphic processor heat sink/thermal fan.

NOTE: If the graphic processor heat sink is replaced, the thermal cooling pad will be attached to the new graphic processor heat sink. Use the thermal cooling pad provided in the kit on the central processor heat sink and graphic processor heat sink.

2. Place the graphic processor heat sink/thermal fan on the system board.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Page Removing the Base Cover Base CoverReplacing the Base Cover Removing the Battery Latch Assembly Battery Latch AssemblyReplacing the Battery Latch Assembly Back to Contents Recommended Tools Before You BeginTurning Off Your Computer Before Working Inside Your ComputerBack to Contents Flashing the Bios From a CD Flashing the BiosFlashing the Bios From the Hard Drive Page Removing the Coin-Cell Battery Coin-Cell BatteryReplacing the Coin-Cell Battery Removing the Processor ProcessorInstalling the Processor Central Processor Heat Sink Processor Heat SinkRemoving the Graphic Processor Heat Sink/Thermal Fan Graphic Processor Heat Sink/Thermal FanBack to Contents Removing the Display Assembly Display AssemblyReplacing the Display Assembly Removing the eSATA Connector ESATA ConnectorReplacing the eSATA Connector Back to Contents Removing the Hard Drive Hard DriveReplacing the Hard Drive Removing the Rear Caps Rear CapsReplacing the Rear Caps Removing the Keyboard KeyboardReplacing the Keyboard Removing the Status Light Board Status Light BoardReplacing the Status Light Board Page Removing the Memory Modules MemoryReplacing the Memory Modules Back to Contents Removing the Mini-Card Wireless Mini-CardWpan one antenna cable Replacing the Mini-CardBack to Contents Removing the Optical Drive Optical DriveReplacing the Optical Drive Removing the Palm Rest Palm RestReplacing the Palm Rest Removing the AC Adapter Connector AC Adapter ConnectorReplacing the AC Adapter Connector Back to Contents Removing the System Board System BoardReplacing the System Board Back to Contents
Related manuals
Manual 74 pages 35.38 Kb
Top Page Image Contents