Back to Contents Page
Coin-Cell Battery
Dell™ Studio XPS™ 1340 Service Manual
Removing the
Replacing the
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.
Removing the Coin-Cell Battery
1.Follow the instructions in Before You Begin.
2.Remove the base cover (see Removing the Base Cover).
3.Disconnect the
4.Lift the
1 | 2 |
| ||
|
|
|
|
|
|
|
|
|
|
Replacing the Coin-Cell Battery
1.Replace the
2.Connect the
3.Replace the base cover (see Replacing the Base Cover).
4.Slide the battery into the battery bay until it clicks into place.