Dell 1340 manual Back to Contents

Page 6

2. Turn off your computer (see Turning Off Your Computer).

NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.

3.Disconnect all telephone or network cables from the computer.

4.Press and eject any installed cards from the ExpressCard slot and the 8-in--1 Memory Card Reader.

5.Disconnect your computer and all attached devices from their electrical outlets.

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you service the computer.

NOTICE: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for other Dell computers.

6.Turn the computer over.

7.Slide the battery release latch to the side.

8.Slide the battery out of the battery bay.

1

battery

2

battery release latch

 

 

 

 

9.Press the power button to ground the system board.

Back to Contents Page

Image 6
Contents Page Base Cover Removing the Base CoverReplacing the Base Cover Battery Latch Assembly Removing the Battery Latch AssemblyReplacing the Battery Latch Assembly Back to Contents Turning Off Your Computer Before You BeginRecommended Tools Before Working Inside Your ComputerBack to Contents Flashing the Bios Flashing the Bios From a CDFlashing the Bios From the Hard Drive Page Coin-Cell Battery Removing the Coin-Cell BatteryReplacing the Coin-Cell Battery Processor Removing the ProcessorInstalling the Processor Processor Heat Sink Central Processor Heat SinkGraphic Processor Heat Sink/Thermal Fan Removing the Graphic Processor Heat Sink/Thermal FanBack to Contents Display Assembly Removing the Display AssemblyReplacing the Display Assembly ESATA Connector Removing the eSATA ConnectorReplacing the eSATA Connector Back to Contents Hard Drive Removing the Hard DriveReplacing the Hard Drive Rear Caps Removing the Rear CapsReplacing the Rear Caps Keyboard Removing the KeyboardReplacing the Keyboard Status Light Board Removing the Status Light BoardReplacing the Status Light Board Page Memory Removing the Memory ModulesReplacing the Memory Modules Back to Contents Wireless Mini-Card Removing the Mini-CardReplacing the Mini-Card Wpan one antenna cableBack to Contents Optical Drive Removing the Optical DriveReplacing the Optical Drive Palm Rest Removing the Palm RestReplacing the Palm Rest AC Adapter Connector Removing the AC Adapter ConnectorReplacing the AC Adapter Connector Back to Contents System Board Removing the System BoardReplacing the System Board Back to Contents
Related manuals
Manual 74 pages 35.38 Kb