Back to Contents Page
Internal Module With Bluetooth® Wireless Technology
Bluetooth Card
Bluetooth Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
Bluetooth Card
Removing the Bluetooth Card
1.Follow the procedures in Before You Begin.
2.Remove the system board (see Removing the System Board).
3.Remove the WWAN module (see Removing the WWAN Module).
4.Remove the display assembly (see Removing the Display Assembly).
5.Remove the display bezel (see Removing the Display Bezel).
6.Remove the screw that secures the bluetooth card to the bluetooth board.
7.Lift and slide the bluetooth card off the bluetooth board.
1
3
screw | 2 | bluetooth card |
tab |
|
|
|
|
|
Replacing the Bluetooth Card
1.Follow the procedures in Before You Begin.
2.Slide the bluetooth card below the tab.
3.Replace the screw that secures the bluetooth card to the bluetooth board.