Removing the Battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Remove the
Procedure
1Remove the screws that secure the battery to the
2Disconnect the battery cable from the system board.
3Lift the battery off the
1
2
1 | battery cable | 2 | screws (4) |
|
|
|
|
4Turn the computer over, open the display, and press the power button for about five seconds to ground the system board.
16 Removing the Battery