Dell P31F001, XPS 15, XPS 9530 owner manual Replacing the I/O Board

Replacing the I/O Board

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

Procedure

1Align the screw holes on the I/O board with the screw holes on the palm-rest assembly.

2Replace the screws that secure the I/O board to the palm-rest assembly.

3Connect the camera cable, coin-cell battery cable, and fan cable to the I/O board.

4Connect the I/O-board cable to the I/O board and the system board.

Postrequisites

1Replace the wireless card. See "Replacing the Wireless Card" on page 27.

2Replace the battery. See "Replacing the Battery" on page 17.

3Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on page 12.

Replacing the I/O Board 41