Dell E6410 TPM Security, Computrace, CPU XD Support, Non-Admin Setup Changes, Admin Setup Lockout

TPM Security	When TPM is enabled, the following options are available:
	•	Deactivate—Disables the TPM. The TPM restricts access to the stored owner information and does not execute any
		commands that use TPM resources.
	•	Activate—Enables and activates the TPM.
	•	Clear—Clears the owner information stored in the TPM.
	Default Setting: Disabled
	Allows you to enable or disable the optional Computrace software. The options are Deactivate, Disable, and Activate.
Computrace	NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes will be
	allowed.
	Default Setting: Deactivate
	Allows you to enable or disable the Execute Disable mode of the processor.
CPU XD Support
	Default setting: Enabled
Non-Admin Setup Changes	Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set. If disabled
	the setup options are locked by the admin password.
Password Configuration	Allows you to determine the minimum and maximum length of Administrator and System passwords.
Admin Setup Lockout	Allows you to prevent users from entering Setup when an Administrator password is set.
Performance
Option	Description
	Enables or disables multi-core support for the processor. Setting options are: All, 1, and 2
Multi Core Support
	Default Setting: All
	Enables or disables the Intel SpeedStep feature.
Intel® SpeedStep™
	Default Setting: Enabled
	Enables or disables the Intel TurboBoost performance.
Intel® TurboBoost™
	Default Setting: Enabled
Power Management
Option	Description
	Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
AC Behavior
	Default Setting: Wake on AC Disabled
	Allows you to set the time at which the computer must turn on automatically.
Auto On Time	You can set the of days, if any, when you would like the system to turn on automatically. The settings are Disabled, Everyday,
	or Weekdays.
	Default setting: Disabled
	Allows you to enable or disable the ability of USB devices to wake the computer from Standby.
USB Wake Support	This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby,
	the BIOS will remove power from all of the USB ports to conserve battery power.
	Default setting: Disabled
	Allows the computer to turn on by a special LAN signal or from Hibernate state when triggered by a special wireless LAN signal.
	Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system.
	•	Disabled — Do not allow the system to power on when it receives a wake-up signal from the LAN or wireless LAN.
Wake on LAN/WLAN	•	LAN Only — Allow the system to be powered on by special LAN signals.
	•	WLAN Only — Allow the system to be powered on by special WLAN signals.
	•	LAN or WLAN — Allow the system to be powered on by special LAN or wireless LAN signals.

Default setting: Disabled

Allows you to enable or disable the ExpressCharge feature.

ExpressCharge

NOTE: ExpressCharge may not be available for all batteries.

Allows you to enable or disable the battery charger. If disabled, the battery will not lose power when the system is connected to an AC adapter but it will not charge either.

Charger Behavior

Default setting: ExpressCharge

POST Behavior

OptionDescription

Allows you to enable or disable the BIOS warning messages when you use certain power adapters. The BIOS displays these messages if you attempt to use a power adapter that has too little capacity for your configuration.

Adapter Warnings

Default setting: Enabled.

Allows you to select one of two methods to enable the keypad that is embedded in the internal keyboard.

•Fn Key Only — The keypad is only enabled when you hold down the <Fn> key.

•By Numlock — The keypad is enabled when (1) the Num Lock LED is ON and (2) no external keyboard is attached. Note

Keypad (Embedded) that the system might not notice immediately when an external keyboard is detached.