Dell E6410ATG specifications Removing the Processor, Replacing the Processor

Back to Removing and Replacing Parts

Processor

Dell™ Latitude™ E6410/E6410 ATG Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Processor

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the ATG Port Cover (applicable on E6410 ATG computer only).

3.Remove the battery.

4.Remove the access panel.

5.Remove the Heat Sink and Processor fan.

6.Rotate processor cam lock counter clock-wise.

7.Lift the processor and remove it from the computer.

Replacing the Processor

To replace the processor, perform the above steps in reverse order.

Back to Removing and Replacing Parts