Back to Removing and Replacing Parts
Modem Plug
Dell™ Latitude™ E6410/E6410 ATG Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Modem Plug
NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the ATG port cover (applicable on E6410 ATG computer only).
3.Remove the battery.
4.Insert a pin it into the modem plug eject hole on the modem port plug to release and remove the snap securing it.
Replacing the Modem Plug
To replace the modem plug, perform the above steps in reverse order.
Back to Removing and Replacing Parts