Dell E6400 ATG manual Removing the Microphone Board, Replacing the Microphone Board

Page 41

2.Replace the two M2.5 x 5-mm screws on the right hinge and the two M2.5 x 5-mm screws on the left hinge.

3.Replace the display panel (see Replacing the Display Panel and Brackets (E6400 ATG)).

4.Replace the display bezel (see Replacing the Display Bezel (E6400 ATG)).

5.Replace the display assembly (see Replacing the Display Assembly (E6400 ATG)).

6.Replace the hinge covers (see Replacing the Hinge Covers).

7.Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly).

8.Follow the procedures in After Working on Your Computer.

Removing the Microphone Board

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1.Follow the instructions in Before Working on Your Computer.

2.Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).

3.Remove the hinge covers (see Removing the Hinge Covers).

4.Remove the display assembly (see Removing the Display Assembly (E6400 and M2400) or Removing the Display Assembly (E6400 ATG)).

5.Remove the display bezel (see Removing the Display Bezel (E6400 and M2400) or Removing the Display Bezel (E6400 ATG)).

6.Lift the small connector lever on the microphone cable.

7.Loosen the captive screw, and carefully lift the microphone board up at an angle and disconnect the microphone cable.

1

display cover

2

microphone board

 

 

 

 

 

 

3

captive screw

4

connector lever

 

 

 

 

 

 

5

microphone cable

 

 

 

 

 

 

 

 

 

 

 

 

 

Replacing the Microphone Board

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1.Slide the cable connector of the microphone cable into the connector on the microphone board.

2.Close the lever on the connector on the microphone board.

3.Angle in and align the microphone board with the notch on the display cover.

Image 41
Contents FCM Dell Latitude E6400 and E6400 ATGRemoving the 1394 Card CardReplacing the 1394 Card Removing the Bottom of the Base Assembly Base AssemblyReplacing the Bottom of the Base Assembly Removing the Base AssemblyReplacing the Base Assembly Follow the procedures in After Working on Your Computer Removing a Battery Latch Assembly Battery Latch AssemblyReplacing the Battery Latch Assembly Page Before Working on Your Computer Working on Your ComputerRecommended Tools After Working on Your Computer Back to Contents Flashing the Bios From the Hard Drive Flashing the BiosFlashing the Bios From a CD Page Replacing the Card Cage Card CageRemoving the Card Cage Page Replacing the Coin-Cell Battery Coin-Cell BatteryRemoving the Coin-Cell Battery Page Removing the Processor Module Processor ModuleReplacing the Processor Module Replacing the Processor Heatsink Assembly Processor Heatsink AssemblyRemoving the Processor Heatsink Assembly Page Removing the I/O Card Replacing the I/O Card Back to Contents Removing the Display Assembly E6400 and M2400 Display AssemblyRemoving the Display Assembly E6400 ATG Replacing the Display Assembly E6400 and M2400Replacing the Display Assembly E6400 ATG Removing the Display Bezel E6400 and M2400 Replacing the Display Bezel E6400 and M2400 Removing the Display Bezel E6400 ATG Removing the Ccfl Display Panel and Brackets E6400 and M2400 Replacing the Display Bezel E6400 ATGPage Removing the LED Display Panel and Brackets E6400 and M2400 Replacing the LED Display Panel and Brackets E6400 and M2400 Removing the Display Panel and Brackets E6400 ATG Replacing the Display Panel and Brackets E6400 ATG Replacing the Display Inverter E6400 and M2400 Removing the Display Inverter E6400 and M2400Replacing the Display Hinges E6400 and M2400 Removing the Display Hinges E6400 and M2400Replacing the Display Hinges E6400 ATG Removing the Display Hinges E6400 ATGReplacing the Microphone Board Removing the Microphone BoardRemoving the Camera and Microphone Assembly Removing the Latch Hook Assembly Replacing the Camera and Microphone AssemblyReplacing the Display Cover Replacing the Latch Hook AssemblyRemoving the Display Cover Page Replacing the Fan FanRemoving the Fan Back to Contents Removing an FCM from the WPAN/UWB/FCM Slot Removing an FCM from the WWAN/FCM SlotReplacing an FCM Holder by module Blue antenna cable Removing the Hard Drive Hard DriveRemoving the 1.8 Hard Drive E6400 ATG Replacing the Hard DrivePage Replacing the 1.8 Hard Drive E6400 ATG Removing the Modular Hard Drive Page Page Replacing the Modular Hard Drive Page Page Follow the procedures in After Working on Your Computer Replacing the Hinge Covers Hinge CoversRemoving the Hinge Covers Replacing the Keyboard KeyboardRemoving the Keyboard Page Replacing the LED Cover LED CoverRemoving the LED Cover Back to Contents Replacing a Memory Module MemoryRemoving a Memory Module Follow the procedures in After Working on Your Computer Replacing the Modem ModemRemoving the Modem Back to Contents Replacing the Modular Drive Modular DriveRemoving the Modular Drive Removing the Palm Rest Assembly Palm Rest AssemblyReplacing the Palm Rest Assembly Replacing the DC Power Cable DC Power CableRemoving the DC Power Cable Page Replacing the RJ-11 Modem Connector RJ-11 Modem ConnectorRemoving the RJ-11 Modem Connector Page Removing the Right Speaker Grill/Fingerprint Reader Assembly Right Speaker Grill/Fingerprint Reader AssemblyPage Removing the System Board Assembly System Board AssemblyReplacing the System Board Assembly Follow the procedures in After Working on Your Computer Troubleshooting Tools TroubleshootingHardware Troubleshooter Page Dell Diagnostics Main Menu Error Messages Solving ProblemsOptical drive problems Ieee 1394 Device Problems Program crashes repeatedly Memory Problems Dell Support Utility Dell Technical Update ServiceAccessing the Dell Support Utility Removing the WLAN/WiMax Card WLAN/WiMax CardReplacing the WLAN/WiMax Card Removing a Wpan UWB/BT Card Wpan UWB/BT CardReplacing a Wpan UWB/BT Card Replacing a Wwan Card Wwan CardRemoving a Wwan Card
Related manuals
Manual 50 pages 51.78 Kb Manual 3 pages 23.42 Kb

E6400 ATG, E6400 specifications

The Dell Latitude E6400 and E6400 ATG are part of the renowned Latitude series from Dell, designed specifically for business professionals who require durability, portability, and performance. Launched in the late 2000s, these laptops have been popular choices among users seeking reliable devices that can withstand everyday rigors.

The Dell E6400 stands out for its robust design and is built to last, featuring a magnesium alloy chassis and a reinforced palm rest. This model is equipped with a 14.1-inch display that offers resolution options including HD and WXGA, making it suitable for various tasks, from spreadsheets to presentations. The screen's anti-glare coating ensures visibility in different lighting conditions, enhancing user experience during prolonged usage.

Powering the E6400 is Intel’s Core 2 Duo processor, providing substantial performance for multitasking and business applications. It supports up to 8GB of RAM, allowing users to run multiple applications seamlessly. The laptop also incorporates a range of storage options, accommodating HDDs or SSDs, which contributes to faster boot times and application launch speeds.

On the connectivity front, the E6400 offers several ports including USB 2.0, an HDMI port, and an Ethernet port, making it versatile for both local and remote work. An optional docking station enhances expansion possibilities, turning it into a powerful workstation.

The E6400 ATG, or All-Terrain Grade, is designed for more demanding environments. It features a rugged exterior, meeting military specifications (MIL-STD-810F) for durability against shocks, drops, and extreme temperatures. The laptop is sealed to protect from dust and moisture, making it an excellent choice for workers in construction, field services, or any outdoor profession.

In terms of power efficiency, both models boast outstanding battery life, often lasting up to 8 hours on a single charge, depending on usage and configuration. The inclusion of Trusted Platform Module (TPM) and optional biometric fingerprint readers enhances security, ensuring sensitive business data remains protected.

Overall, the Dell Latitude E6400 and E6400 ATG balance performance and robustness, making them ideal for professionals on the go and those who require a rigorous workhorse in challenging environments. These models reflect Dell's commitment to quality and innovation in the business laptop segment, catering to a wide array of user needs.