Dell E4310-3ZBDXQ1 Removing the Coin-Cell Battery, Replacing the Coin-Cell Battery

Page 15

Back to Contents Page

Coin-Cell Battery

Dell Latitude E4310 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Coin-Cell Battery

NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the battery.

3.Remove the memory door.

4.Disconnect the coin-cell battery cable from its connector on the system board.

5.Slide the coin-cell battery out of the computer.

Replacing the Coin-Cell Battery

To replace the coin-cell battery, perform the above steps in reverse order.

Back to Contents Page

Image 15
Contents Page System Setup Menu Options System SetupEntering System Setup Boot MenuInternal HDD Password Default Setting Enable Latitude on readerAdmin Password System PasswordPower Management Option Description Non-Admin Setup ChangesPassword Configuration Admin Setup LockoutWireless Switch Fast BootWireless Option Description Wireless Devices Internal WLAN, and Internal BluetoothThermal Events Bios EventsPower Events DellDiag EventsDevice Status Lights DiagnosticsBattery Status Lights Battery Charge and HealthRemoving and Replacing Parts Specifications Contactless Smart Card optional Ports and ConnectorsBattery ExpressCardsAC Adapter PhysicalEnvironmental Back to Contents Battery Removing the BatteryReplacing the Battery Bluetooth Card and Cable Removing the Bluetooth Card and CableReplacing the Bluetooth Card and Cable Coin-Cell Battery Removing the Coin-Cell BatteryReplacing the Coin-Cell Battery DC-In Connector Removing the DC-In ConnectorReplacing the DC-In Connector ExpressCard Removing the ExpressCardReplacing the ExpressCard Display Closure Sensor Removing the Display Closure SensorReplacing the Display Closure Sensor Hard Drive Removing the Hard DriveReplacing the Hard Drive Replacing the Heat Sink and Processor Fan Removing the Heat Sink and Processor FanHinge Covers Removing the Hinge CoversReplacing the Hinge Covers Board Removing the I/O BoardReplacing the I/O Board Keyboard Removing the KeyboardReplacing the Keyboard Display Assembly Removing the Display AssemblyReplacing the Display Assembly Display Bezel Removing the Display BezelReplacing the Display Bezel Display Panel Removing the Display PanelReplacing the Display Panel Optical Drive Removing the Optical DriveReplacing the Optical Drive Memory Removing the MemoryReplacing the Memory Memory Door Removing the Memory DoorReplacing the Memory Door Microphone Board Removing the Microphone BoardReplacing the Microphone Board Mini Card Door Removing the Mini Card DoorReplacing the Mini Card Door Palm Rest Removing the Palm RestReplacing the Palm Rest Subscriber Identity Module SIMCard Removing the SIM CardReplacing the SIM Card Secure Digital SD Card Removing the SD CardReplacing the SD Card Secure DigitalSD Memory Card Removing the SD Memory CardReplacing the SD Memory Card Smart Card Cage Removing the Smart Card CageReplacing the Smart Card Cage Speaker Assembly Removing the Speaker AssemblyReplacing the Speaker Assembly LED Covers Removing the LED CoversReplacing the LED Covers System Board Removing the System BoardReplacing the System Board Ultra-Wide Band UWB/Latitude on Flash Card Removing the UWB/Latitude on Flash CardReplacing the UWB/Latitude on Flash Card Wireless Local Area Network Wlan Card Removing the Wlan CardReplacing the Wlan Card Wireless Wide Area Network Wwan Card Removing the Wwan CardReplacing the Wwan Card Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer Windows Click Start , then click Shut down Windows Vista After Working Inside Your Computer
Related manuals
Manual 6 pages 5.91 Kb