Option | Description | ||
Integrated NIC | Allows you to configure the integrated network controller. The options are: Disabled, Enabled, and Enabled w/PXE | ||
Default Setting: Enabled w/PXE | |||
| |||
Parallel Port | Allows you to configure the parallel port on the docking station. The options are: Disabled, AT, PS2, and ECP | ||
Default Setting: AT | |||
| |||
Serial Port | Allows you to configure the integrated serial port. The options are: Disabled, COM1, COM2, COM3, and COM4 | ||
Default Setting: COM1 | |||
| |||
| Allows you to configure the internal SATA | ||
SATA Operation | Default Setting: RAID On | ||
| NOTE: SATA is configured to support RAID mode. | ||
| Allows you to enable or disable the following devices: | ||
| • | External USB Port | |
| • | Microphone | |
| • | eSATA Ports | |
| • | Media Card | |
Miscellaneous Devices | • | Internal Modem | |
| • | Fixed Bay | |
| • | ExpressCard | |
| • | Hard Drive Free Fall Protection | |
| • | Camera and Microphone | |
| Default setting: All are enabled. | ||
Latitude ON Reader | Allows you to configure the operating mode of the Latitude ON Reader. | ||
Default Setting: Enable Latitude ON reader | |||
| |||
Keyboard Illumination | Allows you to configure the keyboard illumination feature. The options are: Disabled, Auto ALS and Input, and Auto | ||
Input Only | |||
| |||
|
|
| |
Video |
|
| |
Option | Description | ||
Ambient Light Sensor | Allows you to configure the Ambient Light Sensor. | ||
Default Setting: Disabled | |||
| |||
LCD Brightness | Allows you to set the display brightness depending up on the power source (On Battery and On AC). | ||
|
|
| |
Security |
|
| |
Option | Description | ||
| Allows you to set, change, or delete the administrator (admin) password. | ||
Admin Password | NOTE: You must set the admin password before you set the system or hard drive password. | ||
NOTE: Successful password changes take effect immediately. | |||
| NOTE: Deleting the admin password automatically deletes the system password as well. | ||
| Default Setting: Not Set | ||
| Allows you to set, change, or delete the system password. When set, your computer requests you to enter the system | ||
System Password | password every time your computer turns on or restarts. | ||
|
| ||
| Default Setting: Not Set | ||
| Allows you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes | ||
Internal HDD Password | take place immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is | ||
| protected even when installed in another system. | ||
| Allows you to bypass the system and internal hard drive password prompts when your computer restarts or resumes | ||
| from standby. | ||
| You can set Password Bypass to: Disabled and Reboot Bypass. | ||
Password Bypass |
|
| |
| NOTE: You cannot bypass the system or hard drive password when you turn on your computer that has been | ||
| turned off. | ||
| Default Setting: Disabled | ||
| Allows you to enable of disable changes to the system and hard drive passwords when the admin password is set. | ||
Password Change |
|
| |
| Default Setting: Allow | ||
| Allows you to enable of disable the option to enforce strong passwords. | ||
| If enabled, all passwords set on the computer must contain at least one uppercase character, one lowercase character | ||
Strong Password | and be at least 8 characters long. | ||
|
| ||
| Enabling this feature automatically changes the default minimum password length to 8 characters. | ||
| Default Setting: Disabled | ||
| Allows you to enable or disable the Trusted Platform Module (TPM) on the computer. | ||
| NOTE: Disabling this option does not change any settings you may have made to the TPM, or delete any information or | ||
| keys you may have stored there. | ||
TPM Security | When TPM is enabled, the following options are available: | ||
|
| ||
|
|
| |