Dell™ Latitude™ E6400 XFR Service Manual
1
1 Processor module
NOTICE: To avoid damage to the processor module, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.
3.To loosen the ZIF socket, use a small,
1 ZIF socket 2
NOTICE: To ensure maximum cooling for the processor module, do not touch the heat transfer areas on the processor heatsink assembly. The oils in your skin can reduce the heat transfer capability of the thermal pads.
NOTICE: When removing the processor, pull the processor straight up. Be careful not to bend the pins on the processor module.
4.Lift the processor module from the ZIF socket.
12.2 Replacing the Processor Module
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTICE: Do not touch the processor die. Press and hold the processor module down on the substrate on which the die is mounted while turning the cam screw to prevent intermittent contact between the cam screw and processor.
NOTICE: Ensure that the cam lock is in the fully open position before seating the processor module. Seating the processor module properly in the ZIF socket does not require force. A processor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and ZIF socket.
Page 35