Dell 1220 Touch Pad, Fingerprint Reader optional, AC Adapter, Physical, Environmental, Video

Page 8

4-cell

 

12 V (minimum), 17.7 V (maximum)

 

 

 

6-cell

 

9 V (minimum), 13.3 V (maximum)

 

 

 

Temperature range:

 

 

 

 

 

Operating

 

0° to 50 °C (32° to 122°F)

 

 

 

Storage

 

–20° to 65°C (14° to 149°F)

 

 

 

Coin-cell battery

 

CR2032

 

 

 

 

 

 

Touch Pad

 

 

 

 

 

X/Y position resolution

 

240 CPI

(graphics table mode)

 

 

 

Size

 

 

 

 

 

Width

 

68-mm (2.677-inch) sensor-active area

 

 

 

Height

 

37.63-mm (1.481-inch) rectangle

 

 

 

 

 

 

Fingerprint Reader (optional)

 

 

 

 

 

Type

 

Authentec

 

 

 

AC Adapter

 

 

 

 

 

Type

 

65 Watt

 

 

 

Input voltage

 

100–240 VAC

 

 

 

Input current (maximum)

 

1.5 A

 

 

 

Input Frequency

 

50–60 Hz

 

 

 

Output Current:

 

 

 

 

 

65 W

 

43.34 A (maximum at 4 seconds pulse),

 

 

3.34 A (continuous)

Rated Output Voltage

 

19.5 VDC

 

 

 

Temperature range:

 

 

 

 

 

Operating

 

0° to 40° C (32° to 104° F)

 

 

 

Storage

 

–40° to 70° C (–40° to 158° F)

 

 

 

 

 

 

Physical

 

 

 

 

 

Height:

 

 

 

 

 

with a CCFL panel

 

23.5–37.6 mm (0.93–1.48 inches)

 

 

 

with a WLED panel

 

23.5–36.6 mm (0.93–1.44 inches)

 

 

 

Width

 

294.0 mm (11.57 inches)

 

 

 

Depth

 

228.7 mm (9.00 inches)

Weight:

 

 

 

 

 

with a 4-cell battery,

 

 

128 GB SSD, WLED

 

152 kg (3.36 lbs)

panel, and no optical

 

 

 

drive

 

 

 

 

 

 

 

 

Environmental

 

 

 

 

 

Temperature range:

 

 

Operating

0° to 35°C (32° to 95°F)

 

 

Storage

-40° to 65°C (-40° to 149°F)

 

 

 

Relative humidity (maximum):

 

 

 

 

Operating

10% to 90% (noncondensing)

 

 

Storage

5% to 95% (noncondensing)

 

 

 

Video

Video type

Data bus

integrated on system board

integrated video

Image 8
Contents Page F12 Boot Menu System SetupEntering System Setup Diagnostics LED Error CodesDevice Status LEDs Keyboard Status LEDsReseat the LCD cable Adding and Replacing Parts Specifications Battery AudioGraphics Integrated KeyboardTouch Pad Fingerprint Reader optionalAC Adapter PhysicalBack to Contents Battery Removing the BatteryAccess Panel Removing the Access PanelMemory Removing the MemoryWlan Card Removing the Wlan CardCoin-Cell Battery Removing the Coin-Cell BatteryHinge Cover Removing the Hinge CoverBack to Contents Keyboard Removing the KeyboardBack to Contents Media Bay Device Removing the Media Bay DeviceLCD Assembly Removing the LCD AssemblyLift the LCD assembly away from the system Palm Rest Removing Palm RestBack to Contents Internal Module With Bluetooth Wireless Technology Removing the Bluetooth ModuleTPM Module Removing the TPM ModuleHard Drive Removing the Hard DriveBack to Contents Panel Removing the I/O PanelFan Removing the FanPage System Board Removing the System BoardBack to Contents Heat Sink and Processor Removing the Heat Sink and ProcessorBack to Contents Modem Removing the ModemSpeaker Removing the SpeakerLCD Bezel Removing the LCD BezelLCD Inverter Removing the LCD InverterLCD Camera Removing the LCD CameraLCD Panel Removing the LCD PanelBack to Contents LCD Rails Removing the LCD RailsBack to Contents LCD Hinges Removing the LCD HingesTurning Off Your Computer Working on Your ComputerBefore Working Inside Your Computer After Working Inside Your Computer Windows XP Click Start→ Turn Off Computer→ Turn Off