4
3
2
|
|
| 1 |
1 | captive screws (5) | 2 | system board |
3 | 4 | fan cable |
Replacing the Thermal-Cooling Assembly
1Follow the instructions in "Before You Begin" on page 9.
2Align the screw holes on the
3Tighten the five screws that secure the
4Connect the fan cable to the connector on the system board.
5Adhere the tape that secures the fan cable to the system board
6Follow the instructions from step 4 to step 13 in "Replacing the System Board" on page 67.
7Replace the battery (see "Replacing the Battery" on page 16).
76