Removing the Power-Connector Port
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)battery
b)base cover
c)keyboard trim
d)keyboard
e)optical drive
f)primary and secondary hard drive
g)palmrest
h)I/O board
i)display assembly
3.Disconnect the
Installing the Power Connector Port
1.Insert the
2.Install the:
a)display assembly
b)I/O board
c)palmrest
d)primary and secondary hard drive
e)optical drive
f)keyboard
g)keyboard trim
h)base cover
i)battery
3.Follow the procedures in After Working Inside Your Computer.
55