Option | Description | |
|
| |
Drives | Allows you to configure the SATA drives on | |
| board. The options are: | |
| • | |
| • | |
| • | |
| • | |
| • | |
| • |
|
| • | Zero Power ODD |
| Default Setting: The highlighted devices are | |
| enabled. | |
SMART Reporting | This field controls if the hard drive errors for | |
| the integrated drives are reported during | |
| system startup. This technology is part of the | |
| SMART (Self Monitoring Analysis and | |
| Reporting Technology) specification. This | |
| option is disabled by default. | |
| • | Enable SMART Reporting |
USB Configuration | Allows you to define the USB configuration. | |
| The options are: | |
| • | Enable Boot Support |
| • Enable USB 3.0 Controller | |
| • Enable External USB Port | |
| Default Setting: All the options are enabled. | |
USB PowerShare | Allows you to configure the behavior of the | |
| USB PowerShare feature. The option is | |
| disabled by default. | |
| • | Enable USB PowerShare |
Audio | This field enables or disables the integrated | |
| audio controller. | |
| • Enable Audio (Default Setting) | |
Keyboard Illumination | This field lets you choose the operating mode | |
| of the keyboard illumination feature. | |
| • | Disabled (Default Setting) |
| • | Level is 25% |
| • | Level is 50% |
| • | Level is 75% |
| • | Level is 100% |
Unobtrusive Mode | When enabled, pressing Fn+B will turn Off all | |
| light and sound emissions in the system. Press |
60