4.Perform the following steps as shown in the illustration:
a.Release the speaker assembly from the retention clips [1].
b.Remove the speakers from the chassis [2].
Installing the Speakers
1.Insert the speakers into the chassis and press the retaining clips to lock in place.
2.Connect the speakers to the system board.
3.Install:
a.palmrest assembly
b.keyboard
c.memory module
d.hard drive
e.WLAN card
f.access panel
g.optical
h.battery
4.Follow the procedures in After Working Inside Your computer.
Removing the System Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.Battery.
b.optical
c.access panel.
d.WLAN card.
e.hard drive.
f.memory module.
g.keyboard.
25