Installing the System Board
1.Insert the system board into the chassis.
2.Connect the I/O board connector to the system board.
3.Connect the eDP cable to the system board.
4.Connect the speakers to the system board.
5.Connect the power connector to the system board.
6.Tighten the screws to secure the system board to the computer.
7.Install:
a.palmrest assembly
b.keyboard
c.memory module
d.hard drive
e.WLAN card
f.access panel
g.optical
h.battery
8.Follow the procedures in After Working Inside Your computer.
Removing the Display Assembly
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.Battery
b.optical
c.access panel
27