5.Disconnect the eDP cable from its connector [1] and remove the display panel from the display assembly [2].
Installing the Display Panel
1.Connect the eDP cable to its connector and fix the adhesive tape.
2.Place the display panel to align with the screw holders on the display assembly.
3.Tighten the screws to secure the display panel to the display assembly.
4.Install the:
a.display bezel
b.display assembly
c.battery
d.base cover
5.Follow the procedures in After Working Inside Your Computer.
Removing the Camera
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a.base cover
b.battery
c.display assembly
d.display bezel
3.To remove the camera from the display assembly:
a.Disconnect the camera cable from its connector on the display assembly [1].
b.Pry the camera to remove it from the display assembly [2].
16