Option | Description | |
|
| |
Advanced Boot Options | Allows you to enable the Legacy Option | |
| ROMs during the UEFI boot mode. This | |
| option is enabled by default. | |
Date/Time | Allows you to set the date and time. | |
Table 3. System Configuration |
|
|
|
| |
Option | Description | |
|
| |
Integrated NIC | Allows you to configure the integrated | |
| network controller. The options are: | |
| • Enabled UEFI Network Stack | |
| • | Disabled |
| • | Enabled |
| • Enabled w/PXE (Default Setting) | |
|
| NOTE: This option is disabled by |
|
| default. If you enable this option, |
|
| the UEFI Networking Protocols that |
|
| are available are installed, allowing |
|
| the |
|
| features to use the enabled NICs. |
|
| You may have to disable the |
|
| Enabled w/PXE to use this option. |
SATA Operation | Allows you to configure the internal | |
| SATA | |
| are: | |
| • | Disabled |
| • | AHCI (Default Setting) |
|
| NOTE: SATA is configured to |
|
| support AHCI mode. |
Drives | Allows you to configure the SATA drives | |
| on board. The option is: | |
| • |
|
| • |
|
| Default Setting: Both drives are enabled. | |
SMART Reporting | This field controls if the hard drive errors | |
| for the integrated drives are reported | |
| during system startup. This technology | |
| is part of the SMART (Self Monitoring | |
| Analysis and Reporting Technology) | |
| specification. | |
| • Enable SMART Reporting — This | |
|
| option is disabled by default. |
USB Configuration | Allows you to define the USB | |
| configuration. The options are: | |
| • | Enable Boot Support |
33