Dell P21T owner manual Installing the Memory, Removing the Coin-Cell Battery

b. battery

3.Pry the clips securing the memory module until the memory pops-up and remove the memory from the system board.

Installing the Memory

1.Insert the memory on the memory socket until the clips secure the memory.

2.Install the:

a.battery

b.base cover

3.Follow the procedures in After Working Inside Your Computer.

Removing the Coin-Cell Battery

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a.base cover

b.battery

3.Perform the following steps:

a.Disconnect the coin-cell battery cable from its connector on the system board [1].

b.Peel the adhesive tape to release the coin-cell battery cable [2].

c.Release the coin-cell battery cable from its routing channels [3].

d.Pry the coin-cell battery to remove it from the computer [4].

22