Dell P32G owner manual Removing the Display Assembly, Installing the Display Assembly

Page 22

Removing the Display Assembly

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)access panel

b)keyboard

c)palmrest

d)battery

e)display hinge cover

3.Release the antenna cables from their routing.

4.Disconnect the display cable from the system board and remove the screws that secure the display assembly to the computer.

Installing the Display Assembly

1.Connect the display cable to the system board and tighten the screws to secure the display assembly to the computer.

2.Thread the hard drive cable through its routing tabs.

3.Thread the antenna cables through their routing tabs.

4.Install :

a)display hinge cover

b)battery

c)palmrest

d)keyboard

22

Image 22

Contents Regulatory Model P32G Regulatory Type P32G001 Dell Inc Contents Diagnostics System SetupSpecifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your ComputerPage Page Recommended Tools Removing the Subscriber Identity Module SIM CardRemoving the Access Panel Installing the SIM CardInstalling the Secure Digital Card Removing the Security Digital SD CardInstalling the Wlan Card Installing the Access PanelRemoving the Wireless Local Area Network Wlan Card Removing the Coin-Cell BatteryRemoving the Memory Installing the Coin-Cell BatteryInstalling the Memory Removing the KeyboardPage Installing the Keyboard Removing the PalmrestPage Page Installing the Palmrest Removing the Battery Installing the Battery Removing the Hard DriveInstalling the Hard Drive Installing the Display Hinge Cover Removing the Display-Hinge CoverRemoving the Display Assembly Installing the Display AssemblyRemoving the Display Bezel Installing the Display Bezel Removing the Display PanelPage Page Installing the Display Panel Removing the Camera ModuleInstalling the Camera Module Removing the FanInstalling the Fan Removing the System BoardPage Installing the System Board Removing the Heat SinkInstalling the Heat Sink Removing the SpeakersInstalling the Speakers Installing the Power Connector Removing the Power ConnectorRemoving the Input/Output I/O board Installing the I/O Board Page Navigation Keys Boot SequenceKeys Navigation System Setup Options MainSata ODD AdvancedSata Operation Boot SecurityPassword Type Description Updating the BiosSystem and Setup Password Password that you must enter to log on to your systemPress Y to save the changes. The computer reboots Page Enhanced Pre-Boot System Assessment ePSA Diagnostics Device Status LightsTemporary battery failure with AC adapter present Battery Status LightsDiagnostic Beep Codes Beep Description Possible Cause/Troubleshooting StepsReal-time clock power fail Cmos battery failure. Reseat Page Feature Description FeatureUMA HD Wled AG Number of keys Vostro 65 W Vostro Height Contacting Dell Visit support.dell.com