Replacing the Hard Drive
1.Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.
2.Replace the two screws on either side of the hard drive to connect it to the bezel.
3.Slide the hard drive into the bay.
4.Replace and tighten the four screws on the hard drive cover.
5.Install the operating system for your computer, as needed (see "Restoring Your Operating System" in your computer Owner's Manual).
6.Install the drivers and utilities for your computer, as needed (see "Reinstalling Drivers and Utilities" in your computer Owner's Manual).
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original, or comparable, foam packaging. Otherwise, the hard drive may be damaged in transit.
1 | foam packaging | 2 | hard drive |
|
|
|
|
|
|
|
|
|
| |
Back to Contents Page |
|
|
| |