Removing the Speakers
1.Follow the instructions in “Before You Begin” on page 6.
2.Remove the system board (see “Removing the System Board” on page 99).
3.Remove the speaker cables from the routing guides.
4.Lift the speakers off the computer base.
Replacing the Speakers
1.Follow the instructions in “Before You Begin” on page 6.
2.Place the speakers on the computer base.
3.Route the speaker cables into the routing guides.
4.Replace the system board (see “Replacing the System Board” on page 102).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
CHAPTER 23: SPEAKERS
2
1
1 speaker cables | 2 speakers (2) |
0105/0105