CHAPTER 24: CONSUMER IR BOARD
Removing the Consumer IR Board
1. Follow the instructions in “Before You Begin” on page 6.
2. Remove the system board (see “Removing the System Board” on page 99). 3. Remove the speakers (see “Removing the Speakers” on page 105).
4. Remove the two screws that secure the consumer IR board to the computer base.
5. Lift the consumer IR board off the computer base.
Replacing the Consumer IR Board | 2 |
|
1.Follow the instructions in “Before You Begin” on page 6.
2. | Place the consumer IR board on the computer base. |
| 1 |
3. | Replace the two screws that secure the consumer IR board to the computer |
| |
|
| ||
| base. |
|
|
4. | Replace the speakers (see “Replacing the Speakers” on page 105). |
|
|
5. | Replace the system board (see “Replacing the System Board” on page 102). | 1 consumer IR board | 2 screws (2) |
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
0108/0108