Back to Contents Page
Display Assembly and Display Latch
Dell™ XPS M140 Service Manual
Display Assembly
Display Bezel
Display Panel
Display Latch
Display Assembly
Removing the Display Assembly
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
1.Follow the instructions in Preparing to Work Inside the Computer.
2.Remove the hinge cover (see Removing the Hinge Cover).
3.Remove the keyboard (see Removing the Keyboard).
4.Open the display all the way (180 degrees) so that it rests flat against your work surface.
5.Use the
6.Remove the Mini PCI antenna cables from the retaining clips on the base of the computer and pull apart the connectors.
7.Remove the four M2.5 x
8.Lift the display assembly straight out of the computer.