1 | speakers (2) | 3 | speaker cable | 5 | guide post slots (4) |
|
|
|
|
|
|
|
|
2 | M2.5 x | 4 | speaker connector |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacing the Speakers
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
1.Follow the instructions in Preparing to Work Inside the Computer.
2.Follow the instructions in Removing the Speakers.
NOTICE: Exercise care when handling or replacing the speakers.
3. Place each of the new speakers in the appropriate speaker slot.
NOTE: For proper placement, align the slots on the speakers with the
4.Replace the three M2.5 x
5.Connect the speaker cable to the system board.
6.Replace the palmrest (see Replacing the Palm Rest).
7.Replace the microprocessor
8.Replace the display assembly (see Replacing the Display Assembly).
9.Replace the keyboard (see Replacing the Keyboard).
10.Replace the hinge cover (see Replacing the Hinge Cover).
11.Replace the optical drive (see Replacing the Optical Drive).