Dell L502X manual Removing the Palm-Rest Assembly

Page 37

Back to Contents Page

Palm-Rest Assembly

Dell™ XPS™ L502X Service Manual

Removing the Palm-Rest Assembly

Replacing the Palm-Rest Assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.

Removing the Palm-Rest Assembly

1.Follow the instructions in Before You Begin.

2.Remove the battery (see Removing the Battery).

3.Remove the screw that secures the palm-rest assembly to the base cover.

4.Release and push the palm-rest assembly tabs off the base cover.

1	palm-rest assembly tabs (2)	2	screw

3base cover

5.Turn the computer over and open the display as far as possible.

6.Using a plastic scribe, gently ease the palm-rest assembly from the top cover.

Image 37

Contents Regulatory model P11F series Regulatory type P11F003 Removing the Battery BatteryReplacing the Battery Recommended Tools Before You BeginTurning Off Your Computer Before Working Inside Your ComputerBack to Contents Click Enter a Tag Flashing the BiosRemoving the Camera Module Camera ModuleReplacing the Camera Module Back to Contents Removing the Coin-Cell Battery Coin-Cell BatteryReplacing the Coin-Cell Battery Removing the USB Board USB BoardReplacing the USB Board Back to Contents Removing the AC-Adapter Connector AC-Adapter ConnectorReplacing the AC-Adapter Connector Display Display AssemblyPage Display Bezel Replacing the Display AssemblyReplacing the Display Bezel Display PanelReplacing the Display Panel Display-Panel Brackets Display CableReplacing the Display-Panel Brackets Removing the Fan FanReplacing the Fan Back to Contents Removing the Hard Drive Hard DriveReplacing the Hard Drive Removing the Heat Sink Heat SinkReplacing the Heat Sink Back to Contents Removing the Keyboard KeyboardReplacing the Keyboard Removing the Memory Modules Memory ModulesReplacing the Memory Modules Click Start → Control Panel→ System and Security→ System Removing the Mini-Cards Wireless Mini-CardsWwan 2 antenna cables Replacing the Mini-CardsPage Removing the Module Cover Module CoverReplacing the Module Cover Page Removing the Optical Drive Optical DriveReplacing the Optical Drive Back to Contents Removing the Palm-Rest Assembly Palm-Rest AssemblyReplacing the Palm-Rest Assembly Removing the Processor Module Processor ModuleReplacing the Processor Module Removing the Power-Button Board Power-Button BoardReplacing the Power-Button Board Back to Contents Removing the Speakers SpeakersReplacing the Speakers Back to Contents Removing the System Board System BoardReplacing the System Board Entering the Service Tag in the Bios Back to Contents Removing the Top Cover Top CoverReplacing the Top Cover Back to Contents Removing the TV Tuner Connector TV Tuner ConnectorReplacing the TV Tuner Connector Back to Contents Removing the Subwoofer SubwooferReplacing the Subwoofer Back to Contents