CAUTION: To ensure maximum cooling for the processor module, do not touch the heat transfer areas on the processor
CAUTION: When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.
11. Lift the processor module off the ZIF socket.
Replacing the Processor Module
NOTE: If a new processor module is installed, you will receive a new thermal cooling assembly, which will include an affixed thermal pad, or you will receive a new thermal pad along with documentation to illustrate proper installation.
1.Follow the instructions in Before You Begin.
2.Align the
NOTE: The
3. Place the processor module lightly in the ZIF socket and ensure that the processor module is positioned correctly.
CAUTION: To avoid damage to the processor module, hold the screwdriver perpendicular to the processor module when turning the cam screw.
4.Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.
5.Replace the heat sink (see Replacing the Heat Sink).
6.Follow the instructions from step 8 to step 11 in Replacing the Top Cover.
7.Replace the display assembly (see Replacing the Display Assembly).
8.Replace the keyboard (see Replacing the Keyboard).
9.Replace the
10.Replace the memory module(s) (see Replacing the Memory Module(s)).
11.Replace the module cover (see Replacing the Module Cover).
12.Replace the battery (see Replacing the Battery).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.