Dell L502X manual Removing the Camera Module, Replacing the Camera Module

Back to Contents Page

Camera Module

Dell™ XPS™ L502X Service Manual

Removing the Camera Module

Replacing the Camera Module

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.

Removing the Camera Module

1.Follow the instructions in Before You Begin.

2.Remove the battery (see Removing the Battery).

3.Remove the module cover (see Removing the Module Cover).

4.Remove the memory module(s) (see Removing the Memory Module(s)).

5.Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).

6.Remove the keyboard (see Removing the Keyboard).

7.Remove the display assembly (see Removing the Display Assembly).

8.Remove the display bezel (see Removing the Display Bezel).

9.Disconnect the camera cable from the connector on the camera module.

1 camera module 2 camera cable connector

10. Gently pry the camera module off the aluminium foil.

Replacing the Camera Module

1.Follow the instructions in Before You Begin.

2.Adhere the camera module to the aluminium foil.