11
Removing The Internal Storage Device (Solid State Drive)
1.Follow the procedures in Before Working On Your Computer.
2.Remove the label door.
3.Remove the bottom cover.
4.Disconnect the battery cable.
5.Remove the screw that secures the solid state drive to the computer.
6.Lift the solid state drive diagonally and remove it from the computer.
Installing The Internal Storage Device (Solid State Drive)
1.Insert the internal storage device (solid state drive) into its slot.
2.Tighten the screw that secures the internal storage device connection.
3.Connect the battery cable.
4.Install the bottom cover.
5.Install the label door.
6.Follow the procedures in After Working Inside Your Computer.
33