Dell T02G Recommended Tools, Turning Off Your Computer, After Working Inside Your Computer

Page 8

Recommended Tools

The procedures in this document may require the following tools:

Small flat-blade screwdriver

#0 Phillips screwdriver

#1 Phillips screwdriver

Small plastic scribe

Flash BIOS update program CD

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.

1.Shut down the operating system.

2.Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for about 4 seconds to turn them off.

After Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer.

CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for other Dell computers.

8

Image 8
Contents Regulatory Model T02G Regulatory Type T02G001 Dell Inc Contents Removing The Battery Removing The Wireless Local Area Network Wlan CardRemoving The Wireless Wide Area Network Wwan Card Removing The Coin-Cell BatteryTroubleshooting Technical Specifications Contacting DellPage Working on Your Computer Before Working Inside Your ComputerAfter Working Inside Your Computer Recommended ToolsTurning Off Your Computer Interface Feature DescriptionOverview Pen Overview Calibrating The PenRemoving / Inserting the Stylus Battery and Pen Tip Open Control Panel Double-clickTablet PC SettingsElectronic Pen Usage Appearance ActionOpen Control Panel Go to Folder options Working With FilesEntering Text Write character by character Pen FlicksIcon Name Function Touch Usage Docking Station Dock Connector Power LED Installing The SD Memory Card Removing The SD Memory CardPage Installing The Digitizer Pen Removing The Digitizer PenPage Installing The Label Door Removing The Label DoorPage Removing The SIM Card Installing The SIM Card Removing The Bottom Cover Installing The Bottom Cover Removing The Battery Installing The Battery Removing The Wireless Local Area Network Wlan Card Installing The Wireless Local Area Network Wlan Card Removing The Wireless Wide Area Network Wwan Card Installing The Wireless Wide Area Network Wwan Card Installing The Internal Storage Device Solid State Drive Removing The Internal Storage Device Solid State DrivePage Removing The Coin-Cell Battery Installing The Coin-Cell BatteryPage Removing The Speaker Installing The Speaker Removing The Middle Frame Assembly Installing The Middle Frame Assembly Remove the middle frame assembly Removing The CameraInstalling The Camera Removing The Input/Output I/O Board Installing The Input/Output I/O Board Removing The Docking Board Installing The Docking Board Removing The System Board Installing The System Board Removing Low-Voltage Differential Signaling Lvds Cable Installing The Low-Voltage Differential Signaling Lvds Cable System Setup System Setup OverviewEntering System Setup System Setup NavigationBoot Menu System Setup OptionsBattery Health Option Function Intel SpeedStepVirtualization Wake on LANTPM support Enable or disable TPM support Boot ComputraceComputer ExitTroubleshooting Enhanced Pre-boot System Assessment ePSARunning The ePSA Diagnostic Utility FeaturesPage Beep Codes LED Error CodesCode Cause and Troubleshooting Steps Trig Digitizer Troubleshooting Troubleshooting StepsPerformance issues Page Technical Specifications Ports and Connectors BatteryCommunications DisplayEnvironmental AC AdapterPhysical Storage % to 95 % noncondensing Altitude maximum Operating Contacting Dell Visit support.dell.com