10.Remove the screw that secures the camera board to the computer.
11.Lift up the camera board and remove it from the computer.
12.Disconnect the camera cable from the camera board.
Installing The Camera
1.Connect the camera cable to the camera board.
2.Place the camera on the top edge of the display assembly.
3.Tighten the screw that secures the camera in place.
4.Turn the middle frame assembly over, and connect the camera LED cable.
5.Paste the camera cable on the adhesive affixing it to the system board.
6.Connect the camera cable to the system board.
7.Install the middle frame assembly.
8.Install the battery.
9.Install the bottom cover.
10.Install the label door.
11.Follow the procedures in After Working Inside Your Computer.
42