Magma PCI Expansion System, PE6R4, PE6RR manual Install 3rd PartyPCI CardsorHardDrives

M A G M A

Slide the enclosure cover backward to disengage it from the guides at the front of the enclosure by firmly grasping the edges of the cover lip and pulling the cover backward about 1” until it clears the front hold-down, and then lift

the cover off.

Be careful to store the cover to avoid damage while you are working inside the chassis.

CAUTION

When replacing the enclosure cover, be sure that the front edge of the cover slides completely under the front lip of the enclosure.

Install 3rd PartyPCI CardsorHardDrives

CAUTION

When installing PCI cards or hard drives, please ensure that the input current rating specified on the AC input label is not exceeded.

Six (6) PCI-X slots (66MHz)

One (1) non-operational slot – DO NOT USE

Daughter card with x1 and x3 connectors on top of main backplane. Fan assembly with slot holders for full-length cards

14Chapter 4 Install Cards and Drives