M A G M A

Chapter 5 Chassis Maintenance

Like all computer systems, you will need to perform some routine maintenance tasks. Some of these include making sure that the air vents in the chassis are clear of obstructions and that the cooling air from the fans flows freely. You will also need to check the foam filter behind the front panel to ensure it is clean, thus allowing for unrestricted air flow to the fans. You should always keep an eye on all cables to make sure they are not damaged and are securely connected. Occasionally, you should remove the chassis cover and check for loose cards, and remove any dust build-up.

Always to remember to power down your computer and then the expansion system BEFORE you attempt to perform any maintenance tasks.

GeneralChassisCleaning

The environment where your Magma chassis is operating is a key element to how often you will need to perform a general cleaning of your Magma Expansion chassis. To perform a routine general cleaning of your chassis, you will need the following:

1.Can of compressed air (proper distance, 6 inches)

2.Cotton Swabs

3.Isopropyl (alcohol)

4.Anti static wipes

5.Warm water (for filter)

6.Dish soap (for filter)

Do not use a vacuum because vacuums create ESD.

First, remove the four cover screws with your Phillips screwdriver and open the cover.

18Chapter 5 Chassis Maintenance

Page 26
Image 26
Magma PE6RR, PE6R4, PCI Expansion System manual Chassis Maintenance, GeneralChassisCleaning