Option | Description |
|
|
| Click OK after entering the password details. |
System Password | Allows you to set, change, or delete the computer password (previously called the |
| primary password). |
| The drive does not have a password set by default. |
| To add a new password: |
| • Enter the old password |
| • Enter the new password |
| • Confirm the new password |
Strong Password Password Configuration
Click OK after entering the password details.
Enable strong password - This option is disabled by default.
This field controls the minimum and maximum number of characters allowed for the admin and system passwords. Changes to these fields are not active until they are committed via the apply button or saving changes before exiting setup.
• Admin Password Min
• Admin Password Max
• System Password Min
• System Password Max
Password Change | Allows you to determine whether changes to the system and hard disk passwords are | |
| permitted when an administrator password is set. | |
| • Allow | |
| This option lets you determine whether changes to the setup options are permitted | |
| when an administrator password is set. | |
| • Allow Wireless Switch Changes (Default) | |
TPM Security | This option lets you control whether the Trusted Platform Module (TPM) in the system | |
| is enabled and visible to the operating system. | |
| TPM Security (Default) | |
|
| NOTE: Activation, deactivation, and clear options are not affected if you load the |
|
| setup program's default values. Changes to this option take effect immediately. |
PTT | Allows you to enable or disable PTT Support. | |
| • | PTT Security (Default) |
| • | Revoke Trust (Default) |
Computrace (R) | This field lets you activate or disable the BIOS module interface of the optional | |
| Computrace Service from Absolute Software. | |
| • | Deactivate (Default) |
| • | Disable |
| • | Activate |
24