Back to Contents Page
Display Assembly
Dell™ Latitude™ D630 Service Manual
Removing the Display Assembly
Removing the Display Bezel
Removing the Display Panel
Removing the Display Panel Brackets
Removing the Display Panel Cable
Removing the Display Hinges
Removing the Display Assembly
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
1.Follow the instructions in Before You Begin.
2.Remove the hinge cover (see Hinge Cover).
3.Remove the keyboard (see Removing the Keyboard).
4.Review the cable routing diagram:
1 | WWAN/FCM card | 2 | WWAN antenna cables | 3 | WLAN antenna cables |
| connector |
|
|
| (black and white) |
|
|
|
|
|
|
4 | WLAN card | 5 | 6 | display cable | |
|
|
|
|
|
|
7 | WLAN antenna cables | 8 | WLAN antenna cable (gray; |
|
|
| (white and gray) |
| currently unused) |
|
|
|
|
|
|
|
|
NOTICE: To avoid damage to your computer, use the illustration above when replacing the display assembly to carefully reroute the cables in the appropriate cable channels. Route the gray and black antenna cables beneath the white antenna cable, and the black display cable on top of the white antenna cable.
5.Pull straight up on the
6.Disconnect the antenna cables from their card(s) (see Communications Cards).
7.Carefully remove the antenna cables and the display cable from their routing guides.
8.Close the display.
9.Turn the computer upside down with the back of the computer facing you.