
10.From the back of the computer, remove the two M2.5 x
11.From the bottom of the computer, remove the two M2.5 x
12. Turn the computer
1 | antenna cables (2) | 2 | display cable |
|
|
|
|
|
|
|
|
13. Lift the display assembly out of the computer base.
Removing the Display Bezel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
1.Follow the instructions in Before You Begin.
2.Remove the display assembly (see Display Assembly).
3.Use a plastic scribe to pry the six rubber