Dell D620 manual Replacing the Battery

Replacing the Battery

CAUTION: Before performing these procedures, turn off the computer, disconnect the AC adapter from the electrical outlet and the computer, disconnect the modem from the wall connector and computer, and remove any other external cables from the computer.

NOTICE: You must remove all external cables from the computer to avoid possible connector damage.

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell™ computer. Do not use a battery from other computers with your computer.

For information about replacing the second battery, if applicable, see "Media Bay" in the User’s Guide.

To remove the battery:

1If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

2Ensure that the computer is turned off or in hibernate mode (see "Hibernate Mode" in your User’s Guide). Slide the two battery-bay latch releases on the bottom of the computer toward the sides of the computer until they are engaged.

3Grasp the battery by the battery tab and slide the battery horizontally toward the front of the computer.

4Lift to remove the battery from the bay.

1

2

3

1 battery 2 battery-bay latch release (2) 3 battery tab

To replace the battery, follow the removal procedure in reverse order.

Quick Reference Guide

17